Tuesday, March 16, 2010

THE LOOK!

What do all these cars have in common? - THE LOOK!
What makes a car iconic or standout from the rest? - THE LOOK!

Getting the look is not about buying all the best or latest parts and often if you are in a position to do the work yourself then there is no temptation for comprimise of pre made parts to affect the desired stance.

These cars are just a few of my many favourites. Study them for a minute - they are just basic old hot rods really arent they? The stories to these cars have been well documented but can you imagine the fun to be had piecing each one of these cars together?

That then results in a car that has the LOOK from any angle be it standing still or moving down the road!




Model A Centre X Member




There is still a bit to do but here is progress on the A chassis. With hole saws and files etc - the fabrication is starting to take on a look as if Henry did it himself by making the holes/slots in the chassis look like stampings opposed to racey lightning holes

Thursday, February 18, 2010

Deuce style K- Member




Well its day five and the Model A Chassis now has a K-Member as part of the stages to a full X-Member that we have fabricated from folded channel.

There is still plenty to do as the RH leg needs to be notched and modified for the booster and master cylinder to sit in there between the leg and the chassis rail.

The slots need to be cut into each component and the rivets need to be fitted and then the hole for the tail housing needs to be cut.

Heaps of room for where the shifter needs to go and with some careful thought - fitting a brake and clutch pedal should not be a problem

Wednesday, February 17, 2010

Three more to go.....





Doing the X Member for this car it was important to design and construct it in a way that looked like it could have left the Ford factory. That meant that extra time has to be taken to ensure a perfect fit of each component as it interlocks and over laps with the other.
Shown is one leg to the four required to make the "X"

Tuesday, February 16, 2010

Boxing and strength





Of all the material that I have read about chassis construction - if you have well thought out cross members, your strength is in them and not so much the chassis rail boxing or heavy wall material for the cross members.

With TJ's roadster chassis - we are opting for a traditional flavor that means we will partially box the rails at the engine and rear end areas with the X member going between the two boxed areas.

The rear boxing plates are in - a half day each on these to make from three pieces and finish to look like it is one piece stamped! The start of the X member has began with the main plate being built to resemble a '32 K member.

Next up is to finish this main plate and then build the "X"

Friday, February 12, 2010

Firestone Dirt Track Tyres






I love them!
I have been a huge fan of Firestone Dirt Track Tyres with their diamond cut tread pattern and their racing heritage they rate hugely on the smorgasboard of must have hot rod parts.

Lobeck ran them, as did Chapouris with Limefire, Jake, P'Wood and also Dennis Kyle among many and reading the magazines about these cars and the components used made for quite a desire.

So you can imagine the heart rate as I saw these ones today and got given them! WOW! Yes, they are hard and perished but even if they are mounted for a photo on my 32 - that fix will be cured!

My 32 Progress


Over the last few nights I have been able to make great progress and get the doors latched and catched using Rocky Mountain Hinge Co bearclaws from JR & Flick at Rods By Reid.

Just got the LH door skin clecoed on tonight too so I can mount the door handle and hook the linkage up.

Then it not much more to complete the body work - finish the cowl vent, decklid and floor.